fishingtips
Fishing A Lytle’s Secret Tail Spinner
The Lytle’s Secret Tail Spinner has a life-like action and a pounding vibration. This lure has produced extraordinary catches of largemouth bass, smallmouth bass, walleye, striper, striper hybrid, white bass, northern pike, perch, and countless other species.

This lure can be fished year-round: spring, summer, fall, and winter. Due to the unique design features, the Lytle’s Secret can be use in a wider variety of presentations. You can fish the top, middle or bottom of the water column by controlling the retrieve speed.

During the cold water period (winter, early spring, and late fall), look for the fish around deep structures like creek channels, ledges, humps, deep drop offs, long points that fall into deep water, the deep edge of a flat, and around the dam areas. If the fish are relating to the bottom, cast the lure toward the shallower water and let it sink to the bottom with tension on the line as you follow it down. Once it hits bottom, slowly reel the lure in a few feet or more, and then let it flutter back down to the bottom on a semi-tight line. Repeat the process and do this all the way back to the boat. This is to imitate a dying or wounded bait fish. You can also slow roll the Lytle’s Secret Tail Spinner along the bottom by slowly reeling it in at the slowest speed possible, the slower the better.

If the fish are suspending over deep structures, cast the Lytle’s Secret out and let it slowly flutter down, and then slowly retrieve at the depth the fish are holding. With this lure, it’s possible to cover all depths effectively by slowly working the bait down a level at a time.

Another technique that will work during the cold water period is using a vertical presentation with the Lytle’s Secret Tail Spinner. Let the lure sink to the bottom next to a drop off with tension on the line as you follow it down. Once it hits bottom, lift the rod tip a foot or more upward and then drop your rod tip by letting the lure flutter back to the bottom on a semi-tight line, and repeat the process. Watch your line in order to detect a strike, if the lure doesn’t fall all the way back to the bottom, or you feel a slight tick, or the line jumps, set the hook.

During the spring , look for fish moving into the shallow warmer water feeding on baitfish. Some of the areas you want to look for are creek arms, coves, flats next to deep water, and along the dam areas. Cast the Lytle’s Secret Tail Spinner toward the shoreline and slow roll or slowly reel it in, making contact with the bottom or structures every few feet or more all the way back to the boat. Also make sure to cover all depths through the water column for the fish that are suspending off the bottom.

Another good place to fish the Lytle’s Secret in the spring and early summer months is retrieving the lure just above the scattered grass, weed beds, or cover around flats to imitate a baitfish. This will provide a natural looking profile, while the vibration and flash draws strikes.

During summer months, most of the larger fish are moving into the deeper, cooler water on the main lake. Look for baitfish around underwater humps, deep main lake points, edges of creek channels, underwater roadbeds, deep water ledges, deep drop-offs next to flats, and around the dam areas. Most of these fish will be holding on the drop-off of these structures.

Cast the Lytle’s Secret Tail Spinner on the top or on the shallowest part of the structures and let it flutter to the bottom on a semi-tight line. Once it hits bottom, reel the lure at the slowest speed possible to the drop-offs. Also try slowly reeling it in a few feet or more, and then let it flutter down to the bottom on a semi-tight line. Repeat all the way back down the drop-off. Most strikes will occur when the lure is at the drop-off where the fish are holding. Make sure to cover all depths through the water column for the fish that are suspending next to the structures.

Sometimes these fish will be feeding on the surface near the structures chasing the baitfish. Cast the Lytle’s Secret lure past the schooling fish near the surface by keeping the rod tip up high, and start reeling in at a steady speed to keep the lure just under the surface toward the feeding fish. If a fish hits and misses the lure, stop reeling and let the tail spinner flutter down to the bottom, as they will usually hit it on the fall. Once surface activity stops, make sure to slow roll the Lytle’s Secret near the bottom, as some of the fish will be eating the wounded baitfish off the bottom.

During the fall, the fish will be scattered throughout the lake following the baitfish to the cooler, shallower water. Look for these fish back in creek arms and large coves around flats, points, roadbeds, and edges of weed beds. Also look for these fish around main lake points, humps, edges of creek channels, and along the dam areas. This time of the year, a lot of these fish will be suspending around the structures. Try working the Lytle’s Secret Tail Spinner in all depths through the water column with different retrieves until you find the depth they are holding and feeding in. They will changing location and depth throughout the day following the baitfish.

The keys to using the Lytle’s Secret Tail Spinner throughout the seasons is finding the right depth, speed, vibration, and size of lure to trigger the different species of fish to bite.

Good Luck and Good Fishing!!

ProMinnow Swimbaits

I’ve had great success fishing with ProMinnow Swimbaits (www.proswimbaits.com). I’ve caught a lot of fish on this soft plastic bait, and big ones too.

I’m using a 3.5 or 5 inch swimbait in the shad color patterns. I rig the bait with a ProSwimbaits Fish Head Hook in the 1/4, 3/8, or 1/2 ounce size. ProSwimbaits sell this Fish Head Hook with two in a package.

Cast the swimbait on top of points or underwater humps, then swim it back down the drop-off. Once the bait heads down the drop-off, make contact with the bottom every few feet all the way back to the boat.

When I see big fish on the locator I’ll use a vertical jigging presentation with the bait directly below the boat. I usually rip the bait about two to four feet off the bottom and let it fall back down on a semi-slack line, maintaining control of the bait all the time. At times I’ve caught fish swimming the bait in mid-depths where baitfish are suspended. I count down the depth (approximately 1.5 feet per second) then use a steady or fast retrieve with my rod tip in the eleven o’clock position.

I’m using baitcasting equipment to fish the ProMinnow Swimbaits. My rod is a seven-foot meduim heavy action model with a baitcasting reel spooled with 15 or 20 pound test  fluorocarbon line.

Wiper Fishing in Southwest Nebraska
Lakes

Red Willow Reservoir – 10 miles north of McCook on Highway 83
Swanson Reservoir – 2 miles west of Trenton on Highway 34
Enders Reservoir – 5 miles east and 4.5 miles south of Imperial
Medicine Creek Reservoir – 2 miles west and 7 miles north of Cambridge

When To Go

March through November produce the highest number of wipers. Summer offers the best trophy fishing.

Seasonal Patterns

Winter
Late December to February (ice fishing) look for wipers in the deeper sections of the lake. Fish around humps, ridges and points along the creek or river channels, and look for shad in depths of 25 to 50 feet. The best lures are Lytle’s Secret Tail Spinners in 1/4 or 3/4 oz., 1/4 to 1/2 oz. jigging spoons, and dropshot rigs with small plastic or live minnows.

Early Spring
Late February and March (after ice out) look for wipers in the same location as the winter months. 3/4 or 1 oz. Lytle’s Secret Tail Spinners, jigging spoons (1/2 oz. to 1 oz.), 1/2 oz. blade baits like a Silver Buddy, and dropshot rigs with a 3-inch plastic minnow or a live minnow will produce fish.

Spring
From late March to May (water temps of 40 to 65 degrees) some wipers will begin migrating upstream toward creek arms, while others can be caught on the main lake. Look for wipers along drop-offs near the creek channels, points and ridges, and look for schools of baitfish (particularly shad) along flats adjacent to the channels. The best lures are 3/4 or 1 oz. Lytle’s Secret Tail Spinners, 1/4, 3/8, or 1/2 oz. ReelBait Flasher Jigs with 3.5 inch swimbaits, 3.5 or 5 inch ProMinnow Swimbaits on a 1/4, 3/8, or 1/2 oz. Fish Head Hooks, dropshot rigs, jerkbaits, crankbaits, 1/2 oz. to 1 oz. lipless crankbaits (like a Rattl’ Trap), 1/2 oz. to 3/4 oz. blade baits, and 3/8 oz. to 3/4 oz. spinnerbaits. Topwater lures will also work when wipers are feeding near the surface, usually when the water temperature exceeds 55 degrees.

Summer
In June, July and August , when the water temperature warms above 70 degrees, most of the wipers head for the deeper main lake areas. Look for shad along points, humps or islands, and ridges along channels between the middle section of the lake and the dam. A 1 or 1 1/2 oz. Lytle’s Secret Tail Spinners, 1/2 or 3/4 oz. ReelBait Flasher Jigs with 3.5 or 5 inch swimbaits, 3.5 or 5 inch ProMinnow Swimbaits on a 1/4, 3/8, or 1/2 oz. Fish Head Hooks, 5 inch Flutter Spoons, 3/4 oz. to 1 oz. jigging spoon, 3/4 oz. blade baits, 1 oz. to 2 oz. spinnerbaits, deep diving crankbaits, and dropshot rigs with a 3- to 5-inch plastic minnow or a live baits are the best baits during the hot summer days. Mornings and evenings will sometimes bring wipers to the surface to feed on shad. Use topwater baits and presentations to get in on this fast and fun action.

Anglers can also use live bait such as large shiners, bluegills, and gizzard shad. However, shad can be used only during these months, and they must be netted and used in the same lake. Consult the Nebraska Game and Parks Commission’s fishing regulations for specific information on the capture and use of shad.

Fall

In September and October fish the same general locations as summer patterns, but move into slightly shallower water where wipers can often be found ambushing schools of shad between the surface and mid-depths. Wipers won’t relate to cover and structure as much, and they’ll suspend along flats adjacent to channels where shad schools often pass by. Watch for seagulls feeding on shad near the surface to locate baitfish and wipers. 3/4 or 1oz. Lytle’s Secret Tail Spinners, ReelBait Flasher Jigs with 3.5 or 5 inch swimbaits, 3.5 or 5 inch ProMinnow Swimbaits on a 1/4, 3/8, or 1/2 oz. Fish Head Hooks, 5 inch Flutter Spoons, Topwater lures, 3/8 oz. to 1/2 oz. Strike King Rocket Shad, crankbaits, 1/2 oz. to 3/4 oz. blade baits, and 3/4 or 1 oz. jigging spoons are the best lure choices.

Late Fall

From November to ice-up wipers will follow shad into the deepest lake sections. Look for wipers using humps, ridges and deep points along channels. Vertical jigging with Lytle’s Secret Tail Spinners,Flutter Spoons, Jigging spoons, blade baits and a dropshot rig with live or plastic minnows will be most productive. Look for shad and wipers in depths of 25 to 45 feet.

Fishing a Dropshot Rig
Dropshot rigging has become a popular finesse technique for catching game fish in the U.S., particularly largemouth bass. I began using this rig in 2001 and have had a lot of success with it. The rig is highly effective, because it allows you to get a bait suspended off the bottom at a depth where fish are feeding, where baitfish are suspended, or just above vegetation.

Here are some specifics on how I rig for dropshotting:

Fishing line
I prefer fluorocarbon line in six to ten pound test. This is low-stretch, highly sensitive line that allows me to feel the bait as I shake it, and detect bites.

Hooks
I like the Gamakatsu #1 or #2 drop shot hooks. I’m hooking 99 percent of the fish that bite, including wipers on live bait.

Baits
A number of 3″ to 4″ soft plastic finesse baits will work. I’m using the Berkley Drop Shot Bass Minnow and Drop Shot Worm, and the Bass Assassin Baby Assassin. This rig is great with live bait too.

Weights
Split shot or dropshot weights from 1/16 oz. to 1/2 oz. will allow you to get the bait down.

Tie your hook using a Palomar knot and leave a tag of at least 24 inches. Pinch on your lead shot and tie an over hand know beneath it to hold it at the proper depth or use a dropshot weight on the tag end of the line. Use the least amount of weight you can get away with based on wind conditions. (See diagram below)

Hook plastic baits through the nose or head, so they’ll suspend horizontally. Fish the bait vertically beneath the boat, allowing the shot to fall to the desired depth. Make the bait jiggle in place by shaking your rod tip. If you get hung up, a slight tug on the line should pull the weight free or strip it from the line. Just add another piece of lead and quickly get back to fishing.

This technique works best in clear water situations, but I’ve done well in stained water too. Don’t limit yourself to strictly vertical fishing though. You can also cast this rig to shallow water and work it slowly back to the boat with good results.




Copyright © 2009 Steve Lytle. All rights reserved.

Web development by Good Life Outdoors & Mathew Winder.